Jump to content
  • 0

Lerp at 30.3


Question

Posted

So ever since the reset of the server, my lerp will not go any lower than 30.3. When I say it wouldn't go below 30.3, I mean I change the cl_interp in my autoexec folder and no matter how low I put my cl_interp at, in game lerp is always at 30.3. When I do it in-game console, same thing happens, no change in lerp.

I can change it to anything above 30.3 but not below. I used to have lerp of about 10 before the reset. Is there anything I'm missing?

1 answer to this question

Recommended Posts

  • 0
Posted

A lerp of 30.3 really pretty good. Remember, the server went from 100 tick to 66. You're going to have to make a few adjustements as lerp has a ton of factors. 30.3 vs 20 or so is pretty normal. If you were at 10, that is highly unusual. Meaning, very very few people will ever get that low and have it be playable. Your 30.3 is a great setting and I would keep it that way.

Bear in mind that a change from 100 (standard) to 30.3 is still a decrease of 70ms... this is .07 seconds, or not quite a tenth of a second. That's measurable in your reaction times. A difference between 30.3 and 10, is only .0203 seconds. Reaction-wise, its not nearly as big of a difference. Remember that the further you are away from the 100ms standard, the lower the return is on a decreased lerp. Meaning, its harder to tell the difference between a .01 second and .03 second vs .03 second and .10 second.

  • Recently Browsing   0 members

    • No registered users viewing this page.
×
×
  • Create New...